1.工作原理
OMK系列深冷型干燥机是一种对高压压缩空气进行深度冷冻除湿，并进行二级过滤，从而获得低温，干燥，洁净的高品质压缩空气的设备。小于等于80°C的饱和压缩空气进入干燥机的预冷器，在预冷器中与环境空气进行热交换，高温压缩空气的一部分热量被预冷风机带走，预冷后的压缩空气进入到制冷系统的前置蒸发器，与冷媒蒸气进行二次热交换，使本身温度降到接近于冷媒的蒸发温度，并流经前置过滤器除去大量的液态水，油雾和尘埃。洁净的压缩空气进入后置蒸发器进行深度冷却，再经后置精密过滤器彻底滤去液态水，油雾和尘埃。
2.产品特征
该产品具有结构紧凑，安装运输方便，净化效率高，出气温度低等优点。
3.应用行业与范围
该产品主要应用于吹瓶行业（特别是高温罐装的），以及其他需要使用特殊压缩空气的行业。
1. Work
OMK series of deep cold type drying machine is a kind of high-pressure compressed air for freezing and dampness, and for secondary filters, which were cold, dry, clean and high quality compressed air equipment. 80 ° C or less of saturated compressed air into the dryer of the pre-cooling device, in the pre-cooling device in heat exchange with the ambient air, high temperature air pre-cooling fan part of the heat is taken away, after pre-cooling the compressed air into the to the pre-evaporator refrigeration system with secondary refrigerant vapor heat exchange, allowing the temperature dropped close to the refrigerant evaporation temperature, and flows through the pre-filter to remove large amount of liquid water, oil mist and dust. Clean compressed air into the evaporator in-depth post-cooling, then filtered through a thorough post-precision filter liquid, oil mist and dust.
2. Product Features
The product has a compact structure, easy installation and transportation, cleaning, high efficiency, outlet temperature is low.
3. Application and scope of the industry
The product is mainly used in blow molding industry (especially high-temperature cans), and other industries need to use a special compressed air. |
