1、自动卸荷装置：构造精巧，确保安全操作。
2、吸、排气阀：采用瑞典SANDVIK 7C 27M02不锈阀片钢经精密车削，研磨及应力消除，高温下，强度韧性特佳。
3、空气滤清器：进口材料，过滤及消音效果好。
4、气缸：内壁经精密CNC机械加工与研磨，不易拉缸，使用寿命长。
5、活塞环：采用日本理研活塞环，耐磨，耗油少，不易积碳，使用寿命长。
6、连杆：以专用机械精密加工，镗孔，平行度保持在一定标准内，使压缩机运转更平稳，不易失油，滚针轴承采用原装日本轴承。
7、曲轴：磨合部位皆采用耐磨材料表面硬化处理，耐磨性特佳，配平衡锤，振动小。
8、曲轴箱：轴承中心孔，各平面皆经同一台CNC综合加工机一次加工完成，确保平行度与垂直度。
9、皮带轮：经严密动力平衡校正，采用铸铁风扇，轮效应作用大，噪音低，使空压机运转更平稳，气流设计，更具散热降温效果。
1, automatic unloading devices: Compact, to ensure safe operation.
2, suction, exhaust valve: The Swedish SANDVIK 7C 27M02 stainless steel valves by the precision turning, grinding and stress relief, high temperature strength toughness properties.
3, the air filter: import materials, filtration and silencing effect is good.
4 cylinder: wall by the precision CNC machining and grinding, difficult to pull cylinder, long service life.
5, piston ring: color Riken Piston Rings, while the mill, less fuel consumption, easy to coke, long service life.
6, connecting rod: The special machine precision machining, boring holes, parallel to maintain a certain standard within a degree, so that compressor running more stable and difficult to lose oil, needle roller bearing axle with original Japanese.
7, Crankshaft: running-in wear-resistant materials used are part of the surface hardening, wear resistance characteristics, with a balanced hammer, little vibration.
8, Gong axle: Bearing center hole, the plane all by the same CNC Machining completion of a process to ensure the parallelism and perpendicularity.
9, Pulley: After rigorous dynamic equilibrium correction, using cast iron fan, the role of big-round effects, low noise, so that compressor run smoother, and airflow design, and more cooling effect of cooling. |
